Tutorial Task
 |
| Before |
 |
| After |
 |
| ddn |
 |
| diff |
 |
| spec |
My chosen house: Barcelona pavilion.
Independent Study
Modeling Progress:
Concrete
Concrete is a hardened building material created by combining a chemically inert mineral aggregate (usually sand, gravel, or crushed stone), a binder (natural or synthetic cement), chemical additives, and water.
Concrete has become a major focus of green building initiatives and research. The manufacture of the material is one of the worst CO2 generating processes in the world, with five to eight percent of manmade CO2 coming from concrete production. MIT researchers have come up with a way to cut those numbers dramatically by making concrete structures last as long as 16,000 years, requiring less of it to be made in the first place.
There are two theories on how corrosion in concrete occurs:
1. Salts and other chemicals enter the concrete and cause corrosion. Corrosion of the metal leads to expansive forces that cause cracking of the concrete structure.
2. Cracks in the concrete allow moisture and salts to reach the metal surface and cause corrosion.
Glass
Glass is much more resistant to corrosion than most
materials, so much so that it is easy to think of it as corrosion-proof. Glass
windows after several years exposure to the elements remain clear and
apparently unaffected. Glass bottles hold a wide range of liquids that would dissolve
other materials. In the laboratory, reactions are carried out in glass beakers
and flasks without damage to the beakers or contamination of the solutions
reacting.
But, in spite of these indications that glass is
indestructible by chemical attack, under certain conditions it will corrode,
even dissolve. In these cases, it is important to choose the right type of
glass, since some are more corrosion resistant than others. Only a few
chemicals aggressively attack glass -- hydrofluoric acid, concentrated
phosphoric acid (when hot, or when it contains fluorides), hot concentrated
alkali solutions and superheated water. Hydrofluoric acid is the most powerful
of this group; it attacks any type of silicate glass. Other acids attack only
slightly; the degree of attack can be measured in laboratory tests but such
corrosion is rarely significant in service for acids other than hydrofluoric
and phosphoric.
Acids and alkali solutions attack glass in different ways.
Alkalis attack the silica directly while acids attack the alkali in the glass. When
an alkali solution attacks a glass surface, the surface simply dissolves. This
process continuously exposes a fresh surface which in turn is dissolved. As
long as the supply of alkali is sufficient, this type of corrosion proceeds at
a uniform rate.
Acid corrosion behaves quite differently. By dissolving the
alkali in the glass composition, a porous surface is left that consists of the
silica network with holes where the alkali has been removed by the acid. This
porous surface slows the rate of attack since the acid must penetrate this
surface layer to find alkali to dissolve.
Corrosion by water is similar to acid corrosion in that
alkali is removed from the glass surface. Water corrosion acts at a much slower
rate. At high temperatures, however, water corrosion can become significant.
Gauge glasses for steam boilers are a case in point. These products must be
protected from the superheated water by a sheet of mica or replaced on a
schedule that insures that they will not be seriously weakened.
Marble
Marble is susceptible to chemical weathering. Marble holds
up better than limestone in both acid and unpolluted rainwater, but it will
show signs of weathering in time. Water enters small holes in the marble at
this point, worsening the weathering. This phenomenon is known as surface
flaking.
Weathering is the natural breakdown of rocks into smaller
particle sizes and different forms. Marble is a metamorphic rock that was once
a limestone or dolomite rock; therefore, the properties of marble and limestone
are similar. Chemical weathering causes a rock to dissolve or alter its form
from one rock type to another. Over time, a marble or limestone rock may be
subject to physical weathering as well, depending on its location.
Temperature swings from hot to cold can form cracks in
limestone or marble as the rock expands and contracts. Over time, these cracks
will increase in size and weaken the rock, causing it to crack and break into
smaller pieces. In addition, ice crystals and minerals, such as quartz and
calcite, can precipitate in the cracks of the limestone and marble rocks and
cause them to expand and break as the crystals grow.
Marble and limestone rocks are very susceptible to erosion
by water and acid rain. Water from rainfall, streams and rivers pouring over
and hitting the rocks will slowly wear away the surface of the stones. Over
time, the marble and limestone will become smooth and decrease in size. Marble
and limestone river rocks form from the action of water on the rock as they
move down the river. Acid rain has a significant effect on marble and
limestone. Carbonic, sulfuric or nitric acid are components of acid rain that
will react with the calcium carbonate in the marble and limestone to pit and
dissolve the rock over time.
Reference:
http://www.madehow.com/Volume-1/Concrete.html#ixzz2kykt7vV1
http://corrosion.ksc.nasa.gov/corrincon.htm
http://www.cement.org/tech/cct_dur_corrosion.asp http://answers.yahoo.com/question/index?qid=20130603093034AAnCwh9